Description
SUZUKI 220mm Brake Discs Rear for GSXR750 used Stainless steel 420 (2Cr13) with a low carbon content, having a higher coefficient of friction by 18%. This steel is much more resistant to rust than cast steel. The brake discs are drilled in the bird’s wings Design to as possible to get along with as few holes with optimum cleaning the brake disk of rainwater and brake dust. The fewer holes are placed, the better the wet braking performance and the lower the wear.
– Brake ring made of forged Stainless steel 420 (2Cr13) milled with low carbon content.
– Therefore, no distortion of the brake disc even at maximum load.
– No vitrification of the braking surface, coefficient of friction, therefore, remains constant.
– Braking surface drilled with optimized hole pattern.
– Galvanized to protect against corrosion.
– Lowest manufacturing tolerances.
– Standalone design.
Material:Stainless steel 420 (2Cr13)
Position:Rear
Bolts:5
Outer Diameter:220mm
Inner Diameter:89mm
Bolt Hole Diameter:10.5mm
Bolt Hole Circumference Diameter:110mm
Thickness:5mm
Min thickness:4.5mm
Fitment:
Suzuki SV 400 K3/K4/K5 03-05
Suzuki SV 400 SK3/SK4/SK5 03-05
Suzuki GSXR 600 Inc 100th Anniversary 97-21
Suzuki SV 650 K3-K9/L0 Naked Non ABS 03-10
Suzuki SV 650 SK3-SK9/SL0 Top Fairing Non ABS 03-15
Suzuki GSXR 750 Inc 100th Anniversary 96-21
Suzuki GSXR 1000 Inc 100th Anniversary 01-21
Suzuki GSX-S 1000 AL5 (ABS) 15-21
Suzuki GSX-S 1000 FAL5 (ABS) 15-21
Suzuki SV 1000 K3/K4/K5/K6/K7 Naked 03-07
Suzuki SV 1000 SK3-SK7 Faired Model 03-07
Suzuki TL 1000 SV/SW/RW/SX/RX/SY/RY/RK1/SK1 97-02
Suzuki VX 800 L/M/N/P/R/T 90-96
Reviews
There are no reviews yet.