How to Replace Motorcycle Handle Grips?

Motorcycle handlebars are the main contact point between the rider and the motorcycle, and their comfort and durability are crucial to the riding experience. Over time, handles may wear or deteriorate and need to be replaced. This article will guide you on how to properly and safely replace your motorcycle handlebar grips.

You will need to prepare some tools, including screwdrivers, upholstery knives, wrenches, etc. Before starting the operation, please make sure that the motorcycle has been parked on a flat and stable surface and the engine is turned off to ensure safety.

• Motorcycle Old Hand Grips Remove

1. Check whether the motorcycle handlebar is equipped with a balanced weight.

If there is one, use a screwdriver to loosen it and remove it. Balance weights are often used to balance the weight of handlebars, but they need to be temporarily removed when replacing handlebars.

2. Use an upholstery knife to gently cut the cover of the old handle and carefully remove it.

This step needs to be done carefully to avoid scratching the handlebars or other parts.

3. You need to remove the fixed box of the throttle grip.

This usually involves loosening some screws or fasteners. 

4. Once the throttle grip retaining box is removed, you can begin to disassemble the grip itself.

First, loosen the screw on the handle and carefully remove the handle. Please be careful not to damage other components or wiring during this process.

5. Next, you need to remove the insulated tube from the handle.

The purpose of the insulated tube is to prevent heat from being transferred from the engine to the handlebars, ensuring rider comfort. When disassembling, make sure not to damage the insulated pipe.

6. At the end of the handle you will find a chuck.

This clamp needs to be disassembled in order to move the half-circle pad out of the way. Semi-circular pads are often used to secure handles and provide additional stability.

When disassembling the handle, please adjust the angle of the handle to a smaller angle so that it is easier to remove from the hole. Please note that different models of motorcycles may have different disassembly methods.

• Install New Motorcycle Hand Grips

When you’re ready to install the new hand grips, first place the handlebars through the original holes, making sure it lines up with the handlebar mount. Then, adjust the handle to the appropriate position and use a screwdriver to tighten the screws. Make sure the screws are tightened securely enough so they don’t come loose during riding.

Finally, reinstall all the parts in the reverse order of disassembly. This includes insulated tubes, clamps, half-circles, throttle grip retaining boxes, and counterweights (if available). Make sure every part is installed securely and nothing is missing.

After completing the above steps, your motorcycle handlebar has been successfully replaced. Please carefully check that each part is installed correctly and make sure nothing is loose or damaged.

By properly replacing your motorcycle handlebars, you can improve your riding comfort and safety. If you encounter any difficulty or uncertainty during operation, it is recommended to seek help from professional maintenance personnel. They have the experience and expertise to ensure a smooth replacement process.

In summary, although replacing motorcycle hand grips requires some skill and patience, it can be done easily as long as you follow the correct steps. I hope this article has been helpful to you and will allow you to enjoy a more comfortable and safer experience while riding.